Preliminary 22/29.5 SMc Ballistics and Accuracy Results
(Note that inconsistent neck tension and other problems related to case production almost certainly limit accuracy potential)

Loads using 52-grain Match bullets (OAL: Watson, 1.829"; Berger, 1.840")

Primer	Powder	Charge	Velocity @ 15'	Standard Deviation	Group	Notes
400	N133	26.5	3539	13	1.18	Watson, Hard Bolt Lift
		27.0	3594	23	0.90	Berger, Hard Bolt Lift
	H322	27.0	3609	14	0.82	Watson
		27.5	3647	19	0.46	Berger
		28.5	3747	19	1.22	Watson
	BL-C(2)	31.0	3640	18	0.50	Watson
		31.5	3667	31	1.78	Watson, Hard Bolt Lift
	BenchMark	27.0	3507	8	0.81	Watson
		27.5	3535	21	0.6	Watson
	W748	29.5	3588	10	1.80	Watson
		31.0	3757	24	1.00	Watson, Hard Bolt Lift
	Rl-12	29.0	3694	21	1.45	Watson
		30.0	3790	14		Watson
	H4895	28.0	3489	22	0.90	Watson
		29.0			0.52	Watson, Hard Bolt Lift
	4320	29.0	3624	9	0.38	Watson
	N540	31.0	3697	9	0.73	Watson

Following Page
Preliminary 6.5mm/60 SMc Ballistics and Accuracy Results
(Note that inadequate neck tension, harmfully short case necks and excessive bullet-to-case runout probably tended to limit accuracy potential during this preliminary testing)

All loads use Norma 130-gr. Match (moly-plated by Norma under NECO license) seated at 2.72-inch OAL (base of bullet flush with internal neck-to-shoulder juncture), all testing at near 75-degrees F

(Several groups contained called fliers (excessive runout?), typically an additional shot fired and called shot omitted)

Next

2

3

4

5

6

1

7

8

9

10

11

12

13